July 24, 2004

Throttle Rocker Rocks

Crampbuster Cruise ControlThrottle Rocker

Hand get tired on a long ride? Maybe you need a Throttle Rocker!

The Throttle Rocker (also known as a Cramp Buster) is a device that wraps around the throttle grip of your motorcycle. The end protrudes out from the grip to form a contoured portion that comfortably fits the palm of your hand. Using the heel of your hand, you apply downward pressure on the Throttle Rocker and the throttle grip rotates. With a Throttle Rocker you don't have to squeeze the grip to operate the throttle. This means less fatigue and cramping of your hand, because a "death grip" is no longer required to hold throttle speed.

There are more elegant solutions on the market (throttle locks, cruise controls, Throttlemeister) but none as cost-effective as the simple Throttle Rocker.

Available online from...
J. C. Whitney

July 13, 2004

Build Your Own Chopper

Want a Chopper?
Build Your Own! By Michael Holmes
Motorcycle chopper kits are a growth industry. But what does that mean to you and me? Well one thing that we know is that we will have more choppers to ogle at. There is not a single day that goes by without more and more pictures of chopper bikes that have just been finished showing up in all the motorcycle magazines. Then at the weekends, when we are on our “hot” rides, we will see four or five show finish level bikes. There are more choppers around now than there have been in the last twenty five years.
Tips from Rex TechOur Tips
• Shop Around
everybody and their brother-in-law have opened custom bike shops. Don't be a beta tester

Resources
Mail Order Parts
How to Build a Kit Bike
How to Build a Cheap Chopper

Guide to Choppers

Most of these choppers have been built from motorcycle chopper kits, the “bike in a box” approach. But hey, don’t knock it! Building your own chopper has never been easier. There are rolling chassis kits, complete bike kits, and frame manufacturers give you a multitude of choice when it comes to take the plunge and buy a motorcycle chopper kit.
Thirty years ago, the old school chopper builders had to start with a stock bike off-the-shelf and literally chop it to pieces. With the modern chopper kits, there is a viable alternative to taking the cutting torch to your favorite soft tail!
Nowadays, you have a cheap and easier way to build the bike from the ground up. When you take the cost of buying a new bike and the expense of chopping it, it works out much cheaper to start from step one, and your chopper kit. Instead of tossing away the parts that you'll never use again, you can start building your own bike with the parts that you really need. All the parts are included in the motorcycle chopper kit, along with comprehensive instructions.
One of the first questions that people ask when considering buying a kit is how will my bike stand outs from all the other chopper kits? Well think of it this way, you are going to buy a chopper kit. A pile of unassembled raw metal. No paint, no real finish, just a blank canvas. Is your taste in paint jobs likely to be the same as the next guy, who buys the very same kit? I don't think so. What about your taste in bolt-ons, seats, exhausts? Just because you buy the kit doesn’t mean every little thing has to be just so. That is the whole point isn’t it? It's very easy in this way to build your own custom chopper from a chopper kit.
Another big question is, “How long”? The answer to that is as long as it takes. Even on the kit bikes, which are supposed to be designed to fit together like a glove, you are going to run into some snags. It can’t be avoided!
If you want a more concrete guide, try this. An experienced kit builder (though not a professional) I spoke to reckons it took 10 full days to build his last chopper from a kit. For someone less experienced it could take a couple of days longer. Twelve 9 hour days works out at 108 hours. Over evenings and weekends, this could drag out to three or four weeks of living in a pile of motorcycle parts! So be prepared to literally live the experience if you are going to take the plunge.
What about the practical side? Well, there is no substitute for experience. The place to start building up your experience with the mechanical side of building to kit bike is with your current ride. Make sure all you can do the basic maintenance on your motorcycle, and then start to do some simple disassembling. Take off the tires, take off the exhaust, real basic stuff; all of this will help to build a new confidence in the shop side of things. You can also get some great videos on maintenance, and even on building the custom bike of your dreams. Read the books, watch the videos, and buy the t-shirt! Believe me, all the preparation you make will stand you in good stead.
If you really are hopeless at the mechanical side of things, why not pay someone else to help you build it, or even get them to build the whole thing for you? The cost of the kit plus labor could well work out cheaper than buying a chopper “off the shelf”.
And of course, when that beautiful chopper is standing on your driveway, and your friends are asking you “Was it worth it?” you can turn to the chopper, drag your hand across the flames on the tank and the polished chrome, turn back to them and say, “What do you think?”


J&P Cycles - Parts and Accessories for Motorycles

Michael Holmes is a enthusiast for all thing motorcycle. His website, http://www.motorcycleparts-accessories-andmore.com, is a great resource of articles aimed at motorcyclists of all levels.
Article Source: http://EzineArticles.com/

Recommended Reading

Browse our favorite...
Motorcycle Books
Holiday Gift Ideas
Maps and Guides
Calendars and Posters
eBay Motorcycle Auctions